SPECIFICATIONS FOR THE STANDARD 4 DOOR MODEL SHAPCO ATMOSPHERIC CABINET
|
Furnish an atmospheric moist cabinet for the storage of briquets, cubes or molds for same, having provision for both dry and submerged storage. The cabinet is to maintain a dry bulb temperature of 70 to 73 degrees F. plus or minus 1 degree and a relative humidity of not less than 90%, preferable 95% to 100%.
SIZE: 54” wide, 24”deep, 82 ½” high SHELF AREA: 27.6 sq. ft. (for air drying) consisting of 10 wire shelves 21” wide X 19” deep. TANK AREA: 22 sq. ft. (for submerged storage) consisting of 8 tanks 21” wide X 19” deep, having a 4” depth of water. WATER: Provision is made to draw off water required for mixing or wetting specimens. CONSTRUCTION: The cabinet is insulated throughout with THERMA-DUCT R-8 Phenolic board. The frame is constructed of brass angles. The inside is lined with stainless steel and the exterior is stainless steel faced. CONTROL: The cabinet is furnished with temperature controller and is fitted with a recording device. The recorder is furnished with a combination wet and dry bulb temperature recorder with a seven day clock and charts. OPERATION: The cabinet is built and equipped to meet the requirements of laboratories, for research or production testing. It is furnished mounted on a substantial wood base with all heating, cooling and control devices in place and all inter-connections made.
|
SPECIFICATIONS FOR THE STANDARD 6 DOOR MODEL SHAPCO ATMOSPHERIC CABINET
|
Furnish an atmospheric moist cabinet for the storage of briquets, cubes or molds for same, having provision for both dry and submerged storage. The cabinet is to maintain a dry bulb temperature of 70 to 73 degrees F. plus or minus 1 degree and a relative humidity of not less than 90%, preferable 95% to 100%.
SIZE: 81” wide, 24”deep, 82 ½” high SHELF AREA: 55.2 sq. ft. (for air drying) consisting of 15 wire shelves 21” wide X 19” deep. TANK AREA: 33 sq. ft. (for submerged storage) consisting of 12 tanks 21” wide X 19” deep, having a 4” depth of water. WATER: Provision is made to draw off water required for mixing or wetting specimens. CONSTRUCTION: The cabinet is insulated throughout with THERMA-DUCT R-8 Phenolic board. The frame is constructed of brass angles. The inside is lined with stainless steel and the exterior is stainless steel faced. CONTROL: The cabinet is furnished with temperature controller and is fitted with a recording device. The recorder is furnished with a combination wet and dry bulb temperature recorder with a seven day clock and charts. OPERATION: The cabinet is built and equipped to meet the requirements of laboratories, for research or production testing. It is furnished mounted on a substantial wood base with all heating, cooling and control devices in place and all inter-connections made.
|
|
|